Further to being a stockist of hard metals, ALM also stock and supply all the accessories that go with each system.
ALM’s complete range of lead ancillary products display the Lead Sheet Association stamp of approval and are recommended for use by The Lead Contractor’s Association. With backing from the LSA, a 50 YEAR Warranty is provided for all Rolled Lead supplied by ALM.
ALM hold extensive stocks of Lead along with a supporting range of accessories such as fixing clips and strips, hall clips and stainless steel or copper Annular Ringshank Nails. Always look for the Premium Roofing Products label to ensure the best quality possible. Geotextile underlay, or Geotec as it’s also know should also be used beneath the lead as a separation layer. ALM can also supply FSC certificated wood cored roll in various sizes according to batten roll height requirement. From small 38mm roll to king roll 75mm. All of which are required to neatly and correctly construct a lead roof.
Historically, lead gutters could only be laid in runs of 2 metres maximum. ALM hold stocks of lead expansion joints allowing this limitation to be exceeded meaning the drop from one end of a building to the other is severely reduced.
Once the lead installation is complete, Premium Roofing Products Flashpoint available in sand and grey colour (to match the metal or the sand cement) should be used to seal any chased brickwork and Lead Patination Oil should be used to prevent patina run off.
Premium Roofing Products also offer a Lead Restorer which can help bring old lead back to life. The full Premium Roofing Range
Click here (Craftsman guides are available to download from the website and hard copies are available upon request).
For Hard Metals, ALM HM stock every item required from the deck up making us the only one stop shop for metal roofing tradesmen
ALM HM (Hard Metals) stock materials for every aspect of metal roofing from the deck upwards. Starting with Warmfast vapour barrier, one of, if not the best and most popular vapour barrier available on the market for metal roofing. ALM can also supply the next level of build up which, for warm roofing will be some form of rigid insulation board, bonded timber insulation board, composite panel or Foamgals cellular insulation. We are the main UK distributor for Linitherm PAL OSB and
Linitherm PGV Flex. PAL OSB is a highly engineered yet extremely cost effective insulation with foil faced over and underside. 22mm exterior grade OSB is firmly bonded to the top side and both the insulation and OSB are channelled so that when fitted along with warmfast vapour barrier, the metal is protected from open joints that are associated with some other insulation boards.
Linitherm PGV Flex is totally unique. It’s a flexible yet rigid insulation allowing installation of metal directly over the insulation surface whilst taking a curve. Linitherm PGV Flex is the ultimate insulation for Barrel Vault roofing when using a warm roof build up. Warmfast Vapour Barrier and Warmfast Fixings should also be used.
Metdeck is also a rigid insulation bonded to timber, but it has an 18mm plywood surface bonded to Kingspan insulation.
Puren M, distributed internationally by Mifaro and by ALM HM in the UK offer an entire system including vapour barriers and breather membranes completely tailored to your building requirements. With Puren, you’re not just buying the insulation, you are buying a tailored system and Mifaro support.
The Kingspan, Celotex and Xtratherm insulations that ALM offer are all rigid boards. There are various versions for each manufacturer and we can obtain all at the best prices on the market. Please contact us with your requirements.
Fixing/sliding clips - Yvens Decoupret, REES, Warmfast Fixings,
Underlays - Tyvek Supro, VMZINC Membrane, Klober Permosec, Proctor Roofshield
Vapour barriers – Warmfast Vapour Barrier
Timber Batten Rolls
Soldering guns – Express Soldering and Perkeo Soldering
Solder sticks, Quarter bar, Tinmanns C, blow pipe solder
Chemicals for cleaning, Zinn 7, Decolaq
Rainwater Systems – VMZINC, Rheinzink, KME copper, HDF Copper
Snow Guards – REES
S5! Seam Fixings
Where possible we will always try to obtain new products. If the item is not listed please contact our office and we will be happy to help and locate alternative
products at unbeatable prices.
Contact us for a quote and supplier list...
GET IN TOUCH
ALM - Associated Lead Mills Limited
Unit B, Bingley Road
Tel: 01992 444100
Fax: 01992 444150
Copyright ALM 2017. All rights reserved. Website Created by Ginger Pixels
All calls to ALM and ALMHM may be monitored for training and quality assurance purposes - Terms and Conditions